2nd coat of epoxy and sanding
August 30th, 2009 Edit
I added a 2nd thinker coat of epoxy so I can sand it right back to remove bumps without (hopefully) going through to the wood before I put the fibreglass on. I am sanding with the long sanding board and 60 grit paper from a roll I bought off ebay. Even though I washed the surface before sanding to remove the amine blush, the paper does get clogged up quite quickly so I might go through a lot of sandpaper. It takes a LOT of sanding to cover a small area. This might take a while!
Entry Filed under: Boat Project